LowRider v2 to LowRider v3 hardware upgrade kit.
LowRider v2 to LowRider v3 hardware upgrade kit.
Couldn't load pickup availability
The LR4 is in the beta testing phase, if the current design goes through this kit will be slightly altered to accommodate the new screw counts. The beta phase can last 1–3 months, typically 7/15/24
Includes
4 - Linear rails
14 - 5/16 x 1.5" Bolts
95 - M5x30mm Screws
95 - M5 locknuts
22 - M3x10mm screws
10 - M2.5x12mm screws
24 - #4 Wood screws
The list is here, in the Docs.
You Will Still Need
- Printed parts - You can print your own here.
- Optional Metal XZ plates - Metal offers the highest accuracy and rigidity, or you can use the printed version linked above.
- YZ Plates - You can cut your own before disassembling your LR2 here.
- Strut plates - You can cut your own before disassembling your LR2 here, or use the LR3 to cut them.
- 4 Driver boards (Mini Rambo or similar), you can reuse your series wiring, and not endstops.
5 Driver Boards (Rambo, SKR Pro, or similar) It is best to have 3x individual wires, 5x endstops, and 5x endstop wires.
![LowRider v2 to LowRider v3 hardware upgrade kit.](http://www.v1e.com/cdn/shop/products/PXL_20230107_200406550.jpg?v=1673124792&width=1445)
![LowRider v2 to LowRider v3 hardware upgrade kit.](http://www.v1e.com/cdn/shop/products/PXL_20230107_201247581.jpg?v=1673124792&width=1445)